2 June 2010

I followed En Elias and his team to Kampung Parit Haji Yakob. We need to bring down conductor ABC 3x16+25 to let customer cut down trees. There were 12 trees they need to cut down. We wait there for almost 4 hours and put the conductor up at poles. On the way back to the office, En Elias removed creepers at stays to avoid any breakdown in the future.

Figure shows a staff untied the conductor from its holder.

Figure shows the conductor was on the ground and customer can cut down the trees.

Figure shows that a staff put back the conductor to its holder at pole.

1 June 2010

I followed En Hamidon to Tanjung Agas. Customer asked to move a pole which was located near to his front door. En Hamidon with his team move the pole and also replaced old type of conductor- bare wire size 7/.122 aluminium with a new one- ABC 3x95+16+70.

Figure shows new location of a pole (not to near to the customer front door).

Figure shows bare wire been cut to be replaced with conductor ABC.

31 May 2010

It was my 1st day in SAVR Unit. I was introduced to all staff in the team and I was assigned to follow En Hamidon. Before we went to the site, En Ghani, the foremen remind us to aware of safety at the site.
Before we went to Taman Surat Khabar to move a pole which located in the drain. Firstly, En Hamidon switch off the supply at F/Pillar. He removed the fuse at the link which supply the area. They also need to have a permit to do work, PTW Letter.
I also learnt about types of pole and some equipment that they used. Then, we also went to Jln Dato' Haji Hassan to replace old fuses in the black boxes.

27 May 2010
I followed En Aeiman and En Shariff to PMU Pagoh 132/11 kV. Actually, this team need to do preventive work at P/E Kg Batu 14. At the PMU, En Aeiman off the supply to the H. Poles. He used the remote in the control room to trip the supply. Then, he switched off the supply at the breaker that supply electricity to the transformer at P/E Kg Batu 14. En Aeiman also explained the connection and the different between PMU, SSU, substation and H Poles.

26 May 2010
I followed Haji Hudzari and his team to do preventive work at P/E Kilang Cat Sato and P/E Pt Latif. Before starting the work, En Aeiman and En Hazlan, the foremen of Substation Unit off the supply to those substation from P/E Pam Sawah. The cable to the switch gear also been earthed for their safety during the work. In preventing work, they also clean the substation. The dust that been so long at the cable can cause leakage at the cable.

25 May 2010
I followed Haji Hudzari and his team to P/E Parit No 5 and P/E Parit No 8 in Parit Yusof to replace jumper at the H. Poles (Pencawang Atas Tiang). Haji Hudzari and En Jalil explains to me about thr H Poles and the work to replace the jumper.

24 May 2010
It was my first day in Substation Unit. I was given a schedule for Maintenance Department by En Ghani. I was unable to meet their engineer, En Razaifulizam. En Ghani is the foremen for SAVR Unit. I stayed in the office for the whole day because the teams has gone to sites. I learnt about transformer and switch gear.